Markups on drawings

Updated 15 Nov 2026

Last updated: November 2026

Markups are red-pen marks on a drawing: lines, arrows, boxes, handwriting, text and stamps. They sit on the sheet for everyone who can see the drawing, unless you make one private.

Markups are not actions. An action (a Note, RFI, Issue or Approval) has a number and a status and appears in the Actions list. A markup has none of these: it is a mark on the sheet. You can turn any markup into an action later (see below).

Where to find the tools

  • On a computer: open a drawing and click MARKUP ▾ on the toolbar.
  • On a phone or tablet: open a drawing, tap ANNOTATE, and choose a tool from the MARKUP section.

Before you draw, the Markup style panel sets the colour, opacity, line weight and line style. Press Esc to put the tool away.

The tools

Tool How to use it
PENCIL Write or sketch on the sheet. See Pencil notes below.
LINE Click or tap the start, then the end.
ARROW Like a line, with an arrowhead at the end.
MULTI A line with several corners. See Drawing a multi-line below.
FREE Drag to draw a freehand stroke, such as a cloud or a loop around something. Each stroke is its own markup.
BOX and ELLIPSE Drag from one corner to the opposite corner.
TEXT Click where the text goes and type. It is placed when you click away, or press Ctrl+Enter (Cmd+Enter on a Mac).
STAMP A text stamp, such as APPROVED, with an optional date, name and company, or an image stamp from a PNG you upload and save to your stamp library. Click where it goes, then APPLY TO THIS DRAWING, or APPLY TO DRAWINGS… to stamp several at once.

Lines, arrows and multi-lines snap to the drawing's own linework. Hold Shift to keep a line straight across or up and down, and hold Ctrl to place a point without snapping.

Drawing a multi-line

While the MULTI tool is on, a bar at the bottom of the screen tells you what to do next.

  1. Click or tap each corner in turn. The bar counts them.
  2. To take back the last corner, use the undo arrow on the bar (or press Backspace on a computer).
  3. When you are done, click or tap FINISH. A multi-line needs at least two corners.

On a computer you can also double-click the last corner, or press Enter, to finish. CANCEL drops the line you are drawing and keeps the tool on. Esc puts the tool away and drops the line too.

Pencil notes

The Pencil is for handwriting and quick sketches. Everything you write close together, without a long pause, is kept as one note, so a few words such as "check fire rating" move, link and delete as one thing. Starting well away from the note, or after a pause of about 30 seconds, starts a new note.

  • With a finger: one finger writes. Pinch with two fingers to zoom.
  • With a stylus such as Apple Pencil: once FirmWork sees the stylus, the stylus writes and your fingers move and zoom the sheet, so a hand resting on the screen leaves no marks.
  • With a mouse: drag to write.

The Pencil bar has Undo (takes back the last stroke), three colours, a fine and a thick pen, and DONE. Each stroke is saved as you go.

Pencil or Freehand?

Pencil Freehand (FREE)
Best for Handwritten notes and sketches Clouds, loops and quick shapes
What is saved One note for strokes written together One markup per stroke
Detail Keeps the fine detail handwriting needs, at any zoom Smoothed into a clean curve
Resting hand Ignored once a stylus is in use Draws
Length None Shows its length once the drawing's scale is set, and can be part of a length takeoff

Finding and changing markups

  • In the drawing's list: the switch at the top shows All, only Actions, or only Markups. Markups are listed in a red section with a small picture of each one, its name, and who drew it and when. Click or tap one to open it.
  • On the sheet: click or tap a markup to open its panel. Delete is at the top of the panel, and you can change its colour or make it private (only you and the project owner see a private markup).
  • Showing and hiding: the MARKS button hides or shows every markup on the sheet. It only changes your own view.

A stamp placed on several drawings at once asks whether to delete it from this drawing only or from all of them.

Turning a markup into an action

When a mark needs an answer or a follow-up, open its panel and click Make it an action. The usual new-action form opens with a pin at the markup's top-left corner.

  • Choose the type (for example an RFI or an Issue), add a title and any details, and save. The action gets its number and appears in the Actions list.
  • Keep the markup on the sheet, linked to the action is ticked to start with. Untick it if the pin alone is enough and you want the markup removed.

If you later delete an action, markups linked to it stay on the sheet as plain markups.

See also

Was this article helpful?

FirmWork

Drawing & Document Collaboration for Construction

TermsPrivacy

© 2026 Littlebird Australia Pty Ltd ABN 83 111 099 775, trading as FirmWork. All rights reserved.
Registered office: Level 3, 1060 Hay Street, West Perth, WA 6005, Australia.

We use cookies for analytics and advertising.